SAE J2788 : 2020HFC-134a (R-134a) Recovery/Recycle/Recharging Equipment for Mobile Air-Conditioning SystemsAvailability: Within 1-2 working days The purpose of this SAE Standard is to establish the specific minimum equipment performance requirements for recovery and recycling of HFC-134a that has been directly removed from, and is intended for... |
|||
SAE J2789 : 2018Inertia Calculation for Single-Ended Inertia-Dynamometer TestingAvailability: Within 1-2 working days This Recommended Practice is useful to determine the inertia value (wheel load and tire radius) using three basic methods (fixed brake work split, dynamic weight transfer, and axle rating) to determin... |
|||
SAE J2790 : 2021Test Method for Evaluating the Electrical Resistance of Coolant System Hose CoversAvailability: Within 1-2 working days This test method provides a standardized procedure for evaluating the electrical resistance of automotive coolant hose covers. It is know that an electrical potential exists between the engine and the... |
|||
SAE J2793 : 2020Fuel Dispensing Filter Test MethodsAvailability: Within 1-2 working days This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the struc... |
|||
SAE J2802 : 2021Blind Spot Monitoring System (BSMS): Operating Characteristics and User InterfaceAvailability: Within 1-2 working days characteristics and elements of the user interface. A visual BSMS indicator is recommended. BSMS detects and conveys to the driver via a visual indicator the presence of a target (e.g., a vehicle), ad... |
|||
SAE J2806 : 2019Off-Vehicle Brake Testing for Service Brakes over 10 000 lb GVW--Air, Hydraulic, and Mechanical ActuationAvailability: Within 1-2 working days |
|||
SAE J2807 : 2020Performance Requirements for Determining Tow-Vehicle Gross Combination Weight Rating and Trailer Weight RatingAvailability: Within 1-2 working days This document establishes minimum performance criteria at GCWR and calculation methodology to determine tow vehicle trailer rating for passenger cars, multipurpose passenger vehicles and light trucks ... |
|||
SAE J2816 : 2018Guide for Reliability Analysis Using the Physics-of-Failure ProcessAvailability: Within 1-2 working days The Physics-of-Failure (PoF) is a science-based approach to reliability that uses modeling and simulation to design-in reliability. This approach models the root causes of failures such as fatigue, fr... |
|||
SAE J2825 : 2020Measurement of Exhaust Sound Pressure Levels of Stationary On-Highway MotorcyclesAvailability: Within 1-2 working days This SAE Recommended Practice establishes test procedures, test conditions, environment, and instrumentation for determining the exhaust sound pressure levels of stationary motorcycles. These are base... |
|||
SAE J2828 : 2016Off-Road Tire Fire Handling GuidelinesAvailability: Within 1-2 working days This SAE Informational report applies to tires used on off-road, rubber-tired work machines as identified in SAE J1116. This SAE document provides general guidelines for proper handling of potential a... |
|||
SAE J2829 : 2011Pedestrian Visibility - Low Beam Optimization to Reduce Night-time FatalitiesAvailability: Within 1-2 working days |
|||
SAE J2832 : 2019Welded Flash Controlled, High Strength (690 MPa Tensile Strength), Low Alloy Steel Hydraulic Tubing, Stress Relieved, Annealed for Bending, Double Flaring, Cold Forming, and BrazingAvailability: Within 1-2 working days This SAE Standard covers stress relieved electric resistance welded flash controlled single wall high strength low alloy steel tubing intended for use in high pressure hydraulic lines and in other app... |
|||
SAE J2833 : 2018Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending, Flaring, Cold Forming and BrazingAvailability: Within 1-2 working days This specification covers sub-critically annealed electric resistance welded and cold-drawn singlewall high strength low alloy steel tubing intended for use in hydraulic pressure lines and in other ap... |
|||
SAE J2836-1 : 2019Use Cases for Communication Between Plug-in Vehicles and the Utility GridAvailability: Within 1-2 working days This SAE Information Report J2836 establishes use cases for communication between plug-in electric vehicles and the electric power grid, for energy transfer and other applications.... |
|||
Page No: 1 2 3 4 5 6 7 8 9 10 | |||