Title: ASM Handbook Volume 6 : Welding, Brazing, and Soldering Author: D.L. Olson, G.R. Edwards, S. Liu, T.A. Siewert ISBN: 0871703823 / 9780871703828 Format: Hard Cover Pages: 1299 Publisher: ASM International Year: 1993 Availability: In Stock
Description
Contents
Volume 6 is the most comprehensive reference book ever produced on the major joining technologies and their applications to engineered materials. With over 500 illustrations and 400 tables, this book includes practical advice on consumable selection and procedure development, as well as joining fundamentals.
Find the Answers in Four Major Sections:
Fundamentals of Joining--addresses fundamental principles including basic chemistry, physics, and metallurgical concepts.
Joining Processes--provides details on all major joining processes, including process parameters, advantages and limitations, applications, equipment, and health and safety.
Materials Selection for Joined Assemblies--describes how to optimize materials selection for particular applications.
Consumable Selection, Procedure Development, and Practice Considerations--serves as a guide to practices for joining specific materials, based on comprehensive, up-to-date information and data on all principal materials types and joining processes.
Additional topics include: joint evaluation and quality control, modelling of joining processes, underwater welding, space welding, cryogenic welding, joining of composites and plastics, intelligent automation for joining technology, corrosion of weldments, thermal spray coating, cutting processes, health and safety, and welding terms and definitions.
Foreword
Policy on Units of Measure
Preface
Authors
Reviewers
Fundamentals of Joining
Section 1 : Fundamentals of Welding
Energy Sources Used for Fusion Welding
Heat Flow in Fusion Welding
Fluid Flow Phenomena During Welding
Transfer of Heat and Mass to The Base Metal in Gas-Metal Arc Welding
Arc Physics of Gas-Tungsten Arc Welding
Power Sources
Fundamentals of Weld Solidification
Nature and Behavior of Fluxes Used for Welding
Shielding Gases
Solid-State Transformations in Weldments
Cracking Phenomena Associated with Welding
Characterization of Welds
Section 2 : Fundamentals of Brazing and Soldering
Introduction to Brazing and Soldering
Fundamentals of Brazing
Fundamentals of Soldering
Section 3 : Fundamentals of Solid-State Welding
Introduction to Solid-State Welding
Fundamentals of Metals and Metal-to-Ceramic-Adhesion
Fundamentals of Friction Welding
Fundamentals of Diffusion Bonding
Fundamentals of Explosion Welding
Mechanical Properties of Soft-Interlayer Solid-State Welds
Section 6 : Material Requirements for Service Conditions
Material Requirements for Service Conditions
Section 7 : Selection of Carbon and Low-Alloy Steels
Introduction to The Selection of Carbon and Low-Alloy Steels
Influence of Welding on Steel Weldment Soundness
Influence of Welding on Steel Weldment Properties
Section 8 : Selection of Stainless Steels
Introduction to the Selection of Stainless Steels
Selection of Wrought Martensitic Stainless Steels
Selection of Wrought Ferritic Stainless Steels
Selection of Wrought Austenitic Stainless Steels
Selection of Wrought Duplex Stainless Steels
Selection of Wrought Precipitation-Hardening Stainless Steels
Selection of Cast Stainless Steels
Dissimilar Welds with Stainless Steels
Section : 9 : Selection of Nonferrous Low-Temperature Materials
Selection and Weldability of Conventional Titanium Alloys
Selection and Weldability of Advanced Titanium-Base Alloys
Selection and Weldability of Heat-Treatable Aluminum Alloys
Selection and Weldability of Non-Heat-Treatable Aluminum Alloys
Selection and Weldability of Dispersion-Strengthened Aluminum Alloys
Selection and Weldability of Aluminum-Lithium Alloys
Selection and Weldability of Aluminum Metal-Matrix Composites
Section 10 : Selection of Nonferrous High-Temperature Materials
General Welding Characteristics of High-Temperature Materials
Welding Metallurgy of Nonferrous High-Temperature Materials
Postweld Heat Treatment of Nonferrous High-Temperature Materials
Special Metallurgical Welding Considerations for Nickel and Cobalt Alloys and Superalloys
Special Metallurgical Welding Considerations for Refractory Metals
Section 11 : Selection of Nonferrous Corrosion-Resistant Materials
Introduction to The Selection of Nonferrous Corrosion-Resistant Materials
Selection of Nickel, Nickel-Copper, Nickel-Chromium, and Nickel-Chromium -Iron Alloys
Selection of Nickel-Base Corrosion -Resistant Alloys Containing Molybdenum
Selection of Cobalt-, Titanium-, Zirconium-, and Tantalum-Base Corrosion-Resistant Alloys
Section 13 : Brazeability and Solderability of Engineering Materials
Brazeability and Solderability of Engineering Materials
Consumable Selection, Procedure Development, and Practice Considerations
Section 14 : Practice Considerations for Arc Welding
Welding of Carbon Steels
Welding of Low-Alloy Steels
Welding of Stainless Steels
Welding of Cast Irons
Welding of Aluminum Alloys
Welding of Nickel Alloys
Welding of Copper Alloys
Welding of Magnesium Alloys
Welding of Titanium Alloys
Welding of Zirconium Alloys
Hardfacing, Weld Cladding, and Dissimilar Metal Joining
Section 15 : Practice Considerations for Resistance Welding & High-Energy-Beam Welding
Procedure Development and Practice Considerations for Resistance Welding
Procedure Development and Practice Considerations for Electron-Beam Welding
Procedure Development and Practice Considerations for Laser-Beam Welding
Section 16 : Procedure Development and Practice Considerations for Solid-State Welding
Procedure Development and Practice Considerations for Diffusion Welding
Procedure Development and Practice Considerations for Inertia and Direct-Drive Friction Welding
Procedure Development and Practice Considerations for Ultrasonic Welding
Procedure Development and Practice Considerations for Explosion Welding
Section 17 : Practice Considerations for Brazing and Soldering
Selection Criteria for Brazing and Soldering Consumables
Brazing of Cast Irons and Carbon Steels
Brazing of Stainless Steels
Brazing of Heat-Resistant Alloys, Low-Alloy Steels, and Tool Steels
Brazing of Copper, Copper Alloys, and Precious Metals
Brazing of Aluminum Alloys
Brazing of Refractory and Reactive Metals
Brazing of Ceramic and Ceramic-Metal Joints
Application of Clad Brazing Materials
General Soldering
Soldering in Electronic Applications
Special Welding and Joining Considerations
Section 18 : Special Welding and Joining Topics
Introduction to Special Welding and Joining Topics
Thermal Spray Coatings
Underwater Welding
Welding for Cryogenic Service
Welding in Space and Low-Gravity Environments
Joining of Organic-Matrix Composites
Joining of Oxide-Dispersion-Strengthened Materials
Composite-to-Metal Joining
Welding of Plastics
Intelligent Automation for Joining Technology
Corrosion of Weldments
Section 19 : Joint Evaluation and Quality Control
Overview of Weld Discontinuities
Inspection of Welded Joints
Weld Procedure Qualification
Residual Stresses and Distortion
Repair Welding
Fitness-for-Service Assessment of Welded Structures
Evaluation and Quality Control of Brazed Joints
Evaluation and Quality Control of Soldered Joints
Section 20 : Modeling of Joining Processes
Numerical Aspects of Modeling Welds
Characterization and Modeling of The Heat Source
Validation Strategies for Heat-Affected Zone and Fluid-Flow Calculations
Section 21 : Cutting Processes
Oxyfuel Gas Cutting
Plasma Arc Cutting
Air-Carbon Arc Cutting
Mechanical Cutting for Weld Preparation
Safe Practices
Glossary of Terms
Metric Conversion Guide
Temperature Conversion Table
Abbreviations, Symbols, and Tradenames
Index
