Welcome Guest
  |   0 items in your shopping cart
 

BROWSE BY STANDARDS

BROWSE BY CATEGORY

***
 
 
Join our mailing list to recieve newsletters
 

SAE Standards

Total Items : 239
 

SAE AMS 5698 H : 2022

Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable

Availability: Within 1-2 working days
This specification covers a corrosion and heat-resistant nickel alloy in the form of round, square, and flat wire 0.500 inch (12.70 mm) and under in nominal diameter or thickness....
Buy This Item
       
List Price: $ 71
 

SAE J1050 : 2009

Describing and Measuring the Driver's Field of View

Availability: Within 1-2 working days
This SAE Recommended Practice establishes methods for describing and measuring the driver's field of view. The document describes three methods for measuring the direct and indirect fields of view and...
Buy This Item
       
List Price: $ 117
 

SAE J1052 : 2017

Motor Vehicle Driver and Passenger Head Position

Availability: Within 1-2 working days
This SAE Recommended Practice describes head position contours and procedures for locating the contours in a vehicle. Head position contours are useful in establishing accommodation requirements for h...
Buy This Item
       
List Price: $ 102
 

SAE J1059 : 2011

Speedometer Test Procedure

Availability: Within 1-2 working days
This SAE Recommended Practice provides a test procedure for eddy current speedometers, including the odometer if an integral portion of the speedometer, for passenger car service....
Buy This Item
       
List Price: $ 54
 

SAE J1065 : 2022

Nominal Reference Working Pressures for Steel Hydraulic Tubing

Availability: Within 1-2 working days
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herei...
Buy This Item
       
List Price: $ 94
 

SAE J1095 : 2021

Fatigue Test Procedures: Hubs and Wheels for Demountable Rims

Availability: Within 1-2 working days
This SAE Recommended Practice provides uniform laboratory procedures for fatigue testing of spoke wheels and hubs intended for normal highway use on trucks, buses, truck trailers, and multipurpose pas...
Buy This Item
       
List Price: $ 84
 

SAE J1100 : 2009

Motor Vehicle Dimensions

Availability: Within 1-2 working days
Buy This Item
       
List Price: $ 161
 

SAE J1113/13 : 2015

Electromagnetic Compatibility Measurement Procedure for Vehicle Components--Part 13: Immunity to Electrostatic Discharge

Availability: Within 1-2 working days
This SAE Standard specifies the test methods and procedures necessary to evaluate electrical components intended for automotive use to the threat of Electrostatic Discharges (ESDs). It describes test ...
Buy This Item
       
List Price: $ 119
 

SAE J1127 : 2020

Low Voltage Battery Cable

Availability: Within 1-2 working days
This standard covers low voltage battery cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. The tests are intended to qualify cables...
Buy This Item
       
List Price: $ 114
 

SAE J1128 : 2020

Low Voltage Primary Cable

Availability: Within 1-2 working days
This standard covers low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. The tests are intended to qualify cables...
Buy This Item
       
List Price: $ 117
 

SAE J1138 : 2009

Design Criteria - Driver Hand Controls Location for Passenger Cars, Multipurpose Passenger Vehicles, and Trucks (10 000 GVW and Under)

Availability: Within 1-2 working days
The purpose of this SAE Recommended Practice is to describe design criteria pertaining to the location and labeling of hand controls, including embedded displays and controls when displayed, necessary...
Buy This Item
       
List Price: $ 76
 

SAE J1139 : 2010

Direction-of-Motion Stereotypes for Automotive Hand Controls

Availability: Within 1-2 working days
The purpose of this SAE Recommended Practice is to present design recommendations for the direction-of-motion of hand controls found in passenger vehicles, multipurpose vehicles, and trucks. These rec...
Buy This Item
       
List Price: $ 84
 

SAE J119 : 2019

Fiberboard Crease Bending Test

Availability: Within 1-2 working days
This test method is designed to determine the suitability of a painted or unpainted fiberboard for application involving creasing and bending. The specific purpose of the test is to determine whether ...
Buy This Item
       
List Price: $ 60
 

SAE J1192 : 2017

Performance of Audible Warning Devices for Motorcycles

Availability: Within 1-2 working days
This standard established the requirements and test procedures for the operational life, corrosion resistence, and sound pressure level of motorcycle electric and electro pnuematic audible warning dev...
Buy This Item
       
List Price: $ 71
 

SAE J1211 : 2012

Handbook for Robustness Validation of Automotive Electrical/Electronic Modules

Availability: Within 1-2 working days
SCOPE This document addresses robustness of electrical/electronic modules for use in automotive applications. Where practical, methods of extrinsic reliability detection and prevention will also be ad...
Buy This Item
       
List Price: $ 161
 

SAE J1226 : 2011

Electric Speedometer Specification--On Road

Availability: Within 1-2 working days
This SAE Recommended Practice covers electric speedometer systems for general on-road (passenger car, multi-purpose passenger vehicle, truck, and bus) applications....
Buy This Item
       
List Price: $ 76
 

SAE J1231 : 2021

Formed Tube Ends for Hose Connections and Hose Fittings

Availability: Within 1-2 working days
This SAE standard provides general and dimensional specifications for formed tube ends and hose fittings. These connections are intended for general applications in low pressure automotive and hydraul...
Buy This Item
       
List Price: $ 104
 

SAE J1239 : 2010

Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers

Availability: Within 1-2 working days
This SAE Recommended Practice covers the wiring and rectangularly shaped connector standards for all types of trailers whose gross weight does not exceed 4540 kg (10 000 lb). These trailers are groupe...
Buy This Item
       
List Price: $ 97
 

SAE J1248 : 2022

Performance Requirements for Parking Stability of Motorcycles

Availability: Within 1-2 working days
This SAE Recommended Practice presents performance requirements for the parking stability of two-wheeled motorcycles intended for highway use....
Buy This Item
       
List Price: $ 48
 

SAE J1263 : 2010

Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques

Availability: Within 1-2 working days
This procedure covers measurement of vehicle road load on a dry, straight, level road at speeds less than 113 km/h (70 mi/h)....
Buy This Item
       
List Price: $ 134
 

SAE J1268 : 2010

Hardenability Bands for Carbon and Alloy H Steels

Availability: Within 1-2 working days
All carbon and alloy H-band steels are shown, along with their corresponding minimum and maximum hardenability limits, for which sufficient hardenability data have been established and for grades whic...
Buy This Item
       
List Price: $ 156
 

SAE J1273 : 2021

Recommended Practices for Hydraulic Hose Assemblies

Availability: Within 1-2 working days
SAE J1273 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance, and storage of hose and hose assemblies for fluid-power systems. Many of these SAE Recommende...
Buy This Item
       
List Price: $ 110
 

SAE J128 : 2011

Occupant Restraint System Evaluation - Passenger Cars and Light-Duty Trucks

Availability: Within 1-2 working days
This SAE Information Report discusses the signifcant factors which measure the effectiveness of the total occupant restraint system in commonly encountered collision configurations. The total system i...
Buy This Item
       
List Price: $ 84
 

SAE J1281 : 2022

Operator Sound Pressure Level Exposure Measurement Procedure for Powered Recreational Craft

Availability: Within 1-2 working days
This SAE Recommended Practice establishes the procedure for assessing operator sound level exposure for pleasure motorboats under 20 m (65 ft) in length when operated under typical conditions, and des...
Buy This Item
       
List Price: $ 71
 

SAE J129 : 2010

Engine and Transmission Identification Numbers

Availability: Within 1-2 working days
This SAE Recommended Practice has been established to provide direction for the design and installation of an identification number as assigned to passenger car and truck engines and transmissions. In...
Buy This Item
       
List Price: $ 40
 
Page No:  1  2  3  4  5  6  7  8  9  10 
       
 
About Us | Contact us
loading...
This page was created in 0.57780289649963 seconds